americas (usa): 1-888-41-astec europe (uk): 44 (1384) 842-211 asia (hk): 852-2437-9662 104 special features electrical specs 120 watts AA20140 series 104 ? active power factor correction ? en61000-3-2 compliance ? remote sense on outputs one and two ? industry-standard 4.25 x 7 footprint ? adjustable main outputs ? built-in class b emi filter ? overvoltage protection ?overload protection ? thermal overload protection operating temperature: 0 to 50c ambient; derate each output at 2.5% per degree from 50 to 70c electromagnetic susceptibility: designed to meet en61000-4, -2, -3, -4, -5, -6, level 3 humidity: operating; non-condensing 20% to 90% vibration: 5-32 hz sinewave .02 double amplitude 32-2 khz sinewave 1 g peak storage temperature: -40 to 85c temperature coefficient: .04% per c mtbf per mil std 217e: >200,000 hours at full load and 30c ambient conditions and full load input input range 90-264 vac frequency 47-63 hz inrush current 40 a max., cold start @ 25c efficiency 65% typical at full load emi filter fcc class b conducted and radiated, cispr 22 class b conducted and radiated, en55022 class b conducted and radiated, vde 0878 pt3 class b conducted and radiated. power factor 0.99 typical safety ground leakage current <2 ma @ 50/60 hz, 254 vac input output maximum power 70 w convection; 120 w with 30 cfm forced air adjustment range 5% minimum on 3.3 v and 5 v outputs hold-up time 15 ms @ 120 w load, 115 vac input overload protection short circuit protection on all outputs. case overload protected @ 110-145% above peak rating overvoltage protection 3.3 v output: 4.25 v .25 v 5 v output: 6.25 v .75 v, 20-35% above nominal output. latching type recycle ac to reset. remote sense compensates for 0.5 v lead drop min. will operate without remote sense connected. environmental safety tuv en60950 9837006 ul ul1950 e186249 cul csa 22.2-234 level 3 e186249 cb certificate and report de2-002056 ce mark (lvd) total power: 70-120 watts input voltage: 85-264 vac # of outputs: quad w9959_04_lp_099-133_35 2/8/02 4:15 pm page 104
europe astec house, waterfront business park merry hill, dudley west midlands, dy5 1lx, uk telephone: 44 (1384) 842-211 facsimile: 44 (1384) 843-355 americas 5810 van allen way carlsbad, ca 92008 telephone: 760-930-4600 facsimile: 760-930-0698 ordering information asia units 2111-2116, level 21 tower1, metroplaza 223, hing fong road fwai fong, new territories hong kong telephone: 852-2437-9662 facsimile: 852-2402-4426 105 www.astec.com sk1 sk2 1 3 gnd 4.25" (107.95) 7.00" (177.80) 3.75" (95.25) 6.50" (165.10) 8.50" (215.90) height is 1.6" model output minimum maximum load with maximum load with peak regulation 2 ripple number voltage load convection cooling 30 cfm forced air load 1 p/p (pard) 3 AA20140 +3.3 v 0 a 8 a 16 a 18 a 2% 50 mv +5 v 1 a 10 a 20 a 22 a 3% 50 mv +12 v 0.2 a 1 a 2 a 3 a 5% 120 mv -12 v 0 a 0.5 a 0.5 a 1 a 10% 120 mv 1. peak current lasting <30 seconds with a maximum 10% duty cycle. 2. at 25c including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. peak-to-peak with 20 mhz bandwidth and 10 f in parallel with a 0.1 f capacitor at rated line voltage and load ranges. 4. minimum loads are required. connector sk1 pin 1 neutral pin 3 live sk2 pin 1-10 common pin 11 +5 sense pin 12 +3.3 v sense pin 13 +12 v pin 14-17 5 v pin 18-22 3.3 v pin 23 return sense pin 24 -12 v mating connectors ( sk1) ac input: molex: 09-50-8031 (usa) molex: 09-91-03500 (uk) pins: 08-58-0111 (sk2) dc output: molex: right angle 39-30-1240 or 39-29-1248 or vertical 39-28-1243 astec connector kit #70-841-013, includes all of the above. notes: 1. specifications subject to change without notice. 2. all dimensions in inches (mm), tolerance .02. 3. warranty: 1 year 4. weight: 1.38 lb. / .63 kg pin assignments AA20140 series w9959_04_lp_099-133_35 2/8/02 4:15 pm page 105
|